Accessories

                                                                                                                                Back to general description

 

 


01.001.00

Upper bending sword for 3 point bending tests with roller dia 30 mm, length 620 mm including connecting cabel and connecting pin.


01.002.00

Upper bending sword for 4 point bending tests with roller distance adjustable 100 - 200 mm
with roller dia. 30 mm, roller length 220 mm incl. connecting cable and connecting pin.


01.003.00

Lower bending support for bending tests with roller distance adjustable 100 - 360 mm , dia. 30 mm, roller length 620 mm, one support fixed, one support movable and lower guiding plate with guide rails.


01.004.00

Lower guiding plate for roller distance 1100 mm.


01.007.00

Lower bending device for samples  10 x 10 x 60 mm with bending distance of 50 mm to be installed at bending device MA-E 172-01.


01.011.00

Ball seat for 300 kN load frame incl. pressure plate, dia. 216 mm with adaptor and connecting.


01.012.00

Distance plate for 300 kN load frame dia. 210 mm, height 80 mm with lower centering ring, grip and center pin. Can be installed at the lower pressure plate.


01.013.00

Distance plate for 300 kN load frame dia. 210 mm, height 50 mm incl. grip and centering pin.


01.014.00

Distance plate dia. 210 mm, height 80 mm to be installed at lower guiding plate incl. grips and centering pin.


01.021.00

Fixture (measuring frame) for pending tests according EN 1448-3 (tests on shotcrete) part 3: bending tests on concrete beams 150 x 150 x 600 mm without displacement control device
consisting of:
2 clamping devices with 4 clamping screws and 8 adjustment screws
2 clamping devices with fixtures for displacement control device with one middle support


01.022.00

CMOD test according EN 14651


01.026.00

Testing frame for energy absorbtion on fiber reinforced sample plates according EN 14488-5 incl. test punch 100 x 100 mm


01.031.00

2 adaptors for drill cores incl. test punch dia. 50 mm
consisting of:
2 tensile adaptors
2 ball distance discs with centering ring
2 nuts with test punch
2 tensile screws
2 test punch dia. 50 mm


01.036.00

Pull out tests of construction steel from concrete blocks incl. pull off wedges dia. 8-10-12-14-18 mm
consisting of:
base plate for the concrete sample
2 flat steel plates incl. screw and clamping element to clamp the concrete sample in the test machine
1 tensile adaptor for pivoting
1 ball distance plate
1 clamping fixture for clamping wedges with a spring clamping system
1 set clamping wedges for construction steel dia. 8-10-12-14-18 mm
2 thread rods with ring nuts for sample transport
1 clamping device
1 clamping device with fixtures for 2 displacement control device
(without displacement control device)


01.041.00

2 tensile adaptors for construction steel incl. pull of wedges for dia. 8-10-12-14-18 mm
consisting of:
2 tensile adaptors
2 ball distance discs
2 clamping devices for clamping wedges with spring clamping system
2 sets of clamping wedges for construction steel dia. 8-10-12-14-18 mm
2 pins to fix the tensile device in the machine


01.901.00

Distance plate 170 x 170 x 50 mm, hardened and ground, centering cross on upper side, incl. grips


01.931.00

Adaptor extention dia. 200 mm for the 300 kN load frame incl. pin

                                                                                                                                Back to general description